How to connect the device to the mobile app

How to connect the device to the mobile app

1. Please connect DVR system to the Internet:

   a) Please connect the system to a router via LAN cable first

    b) Please DO NOT tick "Enable" of the IP FILTER in the Network page, see below pic

    3)Please check the system if it is connected to the Internet successfully. If yes, you can add the device to the mobile app.

2.Open the app, if it is the first time use, directly click the "+" icon in the upper right corner of the"Device Manager" interface; if it is not the first time, click the icon in the upper left corner,then select "Device List" to enter the "Device Manager" Interface, and then click the "+" icon in the upper right corner.

3.Scan the P2P ID QR code on the DVR / NVR to add the device. (Alternatively, it can be added through "Online Search" and "Manual Add", the method is omitted).

4.This step is more important:

a) The "Media Port" must be the same as the "Client" port on the DVR / NVR (If the user's DVR /NVR has not been modified, the default value is 9000. If the user has modified the "Client" port on the DVR / NVR, (The "Media Port" on the APP needs to be modified synchronously).

b) "User Name" fill in the user name set during the first use. If you are not sure, you can click"Setup"-"System"-"Multi-User" to view.

c) "Password" fill in the password set during the first use, which is the login password of the user DVR / NVR.

5.After the setting is completed, click "Save", then the APP will display the added device, and"Connection Status" prompts "Connected" to indicate that the DVR / NVR is connected. Click the icon  to play the video. Click on the icon to select 1/4/8/16 picture viewing.